Mobile pos handheld Features:
- Smart mobile pos machine with android 7.1 or android 12 operating system
- EMV and PCI Certified
- Quad-core with high performance, financial-level security Dual CPU design, supports remote updating.
- Memory options: 1GB RAM + 8GB ROM or 2GB RAM + 16GB ROM
- 5600mAh Large- capacity lithium-ion battery, more than 100 hours standby withsleep mode, one time fully charging can work for 500
- Supports high speed thermal printing, and barcode scanning.
- Support magnetic card / IC chip card / NFC contactless card reading writing
- Provide free Android SDK support
- OEM/ODM inquiry is accepted
Mobile pos handheld Technical Specification:
| EMV and PCI Certified Mobile payment pos handheld Z90 | |
| Operating system | Android 7.1，1+8GB or Android 12.0，2+16GB |
| CPU model | Qualcomm Quad-Core ARM Cortex-A7 Processor |
| CPU Clock Range | 1.1GHz |
| RAM | RAM:1GB/2GB | EMMC:8GB/16GB |
| LCD Screen | 5.0 inch | Display Resolution: 720*1280 |
| Fingerprint collection module(optional) | Spatial resolution :508 DPI
Active sensor area :12.8mm*18.0mm (In compliance with FBI) |
| Communication | 4G/3G/2G/Hot spot/Bluetooth |
| GPS | Built-in GPS |
| USB | USB 2.0 HS,Micro USB(OTG),Mini USB serial port |
| Camera | Rear camera:5 Mega-pixel | Front camera:0.3 Mega-pixel Support 1D / 2D scanning |
| Card Slot | SIM ×1; SAM×2; microSD×1 |
| Touch Screen | Capacitive touch screen, support the electronic signature |
| Printer | Built-in high speed thermal printer,58mm print paper |
| Magnetic card | Support 1/2/3 track, Bi-directional swiping |
| Contact IC card | support type A(5.0V),type B(3.0V) or type C(1.8V) (In compliance with EMV and PBOC) |
| NFC card | Support ISO/IEC14443 Type A&B, Mifare1
(In compliance with EMV and PBOC,with card reading indicator) |
| GPS | Built-in GPS |
| Multimedia | Support for recording, voice broadcast Support video play back/recording |
| Password keyboard | Built-in password keyboard (virtual);
Support DES, 3 DES, RSA, SHA – 256 and AES;algorithm |
| Battery | Lithium battery, 2800 mAh, 7.4V |
| Power adapter | Input:110V to 240V AC/50 ~ 60Hz | Output: 5 v DC / 2 A General Micro USB interface |
| Dimension and weight | 191.6mm×80.2mm×46mm,424g |
|
Standard Accessories |
1pc power adaptor, 1pc User Manual, 1pc Warranty card, 1pc USB cable,
roll 58mm thermal paper, 1pc desk top charger(optional) 1pc silicone protecting case(optional) |
|
Certificate |
Unionpay Terminal Safety Certification Unionpay POS Terminal Safety Assessment EMV Contact Terminal L1&L2
EMV Contactless Terminal L1 PCI 5.x, PBOC3.0 L1&L2 QUICS, FCC,CE, 3C, FBI(Fingerprint module) |
| Fingerprint collection module(option al) | Spatial resolution :508 DPI
Active sensor area :12.8mm*18.0mm Size：23.0 * 35.0 mm Image resolution：508 dpi Communication interface：SPI(slave) Working temperature：0~55℃ System support：Embedded, android，Linux
|
||
| Charging Base/Dock | |||
|
Hardware |
Chipset:MT7628MN； 8MB FLASH；
64MB DDR2 |
||
|
WiFi |
WiFi Frequency | 2.4~2.4835GHz | |
| RF Standards | Based on IEEE 802.11n,IEEE 802.11g,IEEE 802.11b | ||
|
Signal Rate |
802.11n:Up to 300Mbps
802.11g:Up to 54Mbps 802.11b:Up to 11Mbps |
||
| Modulation Type | DBPSK,DQPSK,CCK and
OFDM( BPSK/QPSK/16-QAM/64-QAM) |
||
|
Port |
WAN | 1*RJ45 WAN Port | |
| LAN | 1*RJ45 LAN Port | ||
| USB | 1*TypeC，high speed USB2.0，5V 2A input | ||
| USB-A | 1*USB-A，5V 200mA output | ||
| POGO PIN | 2*POGO PIN，for Z90 charging | ||
Mobile pos handheld detailed photos:
